SUP720啟動過程詳解
一、 上電自檢過程
（1） 引擎加電后，由電源電路來完成引擎的上電和對線卡的基本信息的訪問。
其中，電源管理芯片（U71）的工作電壓主要是有背叛的A3.3V（經P1）提供。
（2） 同時，系統控制器(U66) 也會對電路進行檢測，將檢測到的信息與U58（EEPROM）里面
的信息進行對照，根據結果發給電源管理芯片（U71）一個信號，來決定是否繼續給電路加電。
（3） 在加電自檢（POST）過程中，引擎執行ROM內的加電自檢診斷程序，對CPU，內存、網絡接口的情況進行檢查。
確定硬件正常后，開始對軟件進行初始化過程。
二、軟件初始化過程
（1）首先，執行ROM（SP中的BOOTROM）中引導加載程序 （GENERIC BOOTSTRP LOADER）
ROM 在SP和RP的軟件控制之下，SP和RP的boot code 在flash中，ROM monitor和boothelper也在FLASH中。
（2）其次，系統對軟件進行引導，啟動映像。從FLASH中加載CISCO IOS 軟件。將IOS的內容復制到內存中，在內存中運行。

Cisco IOS 軟件存放的地方很多，缺省從FLASH中查找IOS軟件映像，實際加載過程是根據配置寄存器的啟動字段（bootfield）來加載。
（3）IOS 加載細微過程。SP 初始自己的啟動進程，解壓IOS中SP的鏡像，加載到SP 的DRAM，當switch Processor鏡像
完全啟動，移交個RP，進行RP啟動。Router processor 從Flash (botflash)中下載RP鏡像到RP DRAM中進行解壓縮，等到全部解壓縮之后
進入console CLI，同時查找有效的配置文件，一般這些配置文件保存到NVRAM中，然后將這些配置文件加載入主存中，然后逐行執行。

一下通過一臺7609設備的啟動過程 詳細介紹 IOS的加載過程
System Bootstrap, Version 12.2(33r)SRB4, RELEASE SOFTWARE (fc1) //SP 中的 ROM 執行引導加載程序
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2007 by cisco Systems, Inc.
C7600-RSP720/SP platform with 1048576 Kbytes of main memory // switch process 先行啟動,進行初始化

Autoboot executing command: “boot bootdisk:c7600rsp72043-advipservicesk9-mz.122-33.SRD5.bin” //通過bootfile 加載 flash中的IOS

Initializing ATA monitor library… //SP 中的的 montior 進行設備自檢

Self extracting the image… [OK] //IOS執行自我解壓縮
Self decompressing the image : ###########################################此處省略##
Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software – Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, c7600rsp72043_sp Software (c7600rsp72043_sp-ADVIPSERVICESK9-M), Version 12.2(33)SRD5, RELEASE SOFTWARE (fc2) //加載SP軟件
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Sat 02-Oct-10 18:47 by prod_rel_team
Image text-base: 0x0800015C, data-base: 0x0C000000
*Aug 14 16:09:48.079: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

*Aug 14 16:09:44.851: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor //進行進程初始化

*Aug 14 16:09:48.079: %OIR-SP-6-CONSOLE: Changing console ownership to route processor //SP進程初始完成移交給 RP 進程

———————下面進行 RP的IOS加載過程 同 SP 過程

System Bootstrap, Version 12.2(33r)SRB4, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2007 by cisco Systems, Inc.
C7600-RSP720/RP platform with 1048576 Kbytes of main memory

Download Start
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!此處省略!!!!
Download Completed! Booting the image.
Self decompressing the image : ########################################此處省略######
Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software – Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRD5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Sat 02-Oct-10 18:39 by prod_rel_team
Image text-base: 0×08000224, data-base: 0×10000000
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
[email protected].

Cisco CISCO7609-S (M8500) processor (revision 1.0) with 917504K/65536K bytes of memory. // 全部加載完成，進行配置的加載
Processor board ID FOX1138114F
BASEBOARD: RSP720
CPU: MPC8548_E, Version: 2.0, (0×80390020)
CORE: E500, Version: 2.0, (0×80210020)
CPU:1200MHz, CCB:400MHz, DDR:200MHz,
L1: D-cache 32 kB enabled
I-cache 32 kB enabled

Last reset from power-on
1 Virtual Ethernet interface
148 Gigabit Ethernet interfaces
8 Ten Gigabit Ethernet interfaces
3964K bytes of non-volatile configuration memory.

500472K bytes of Internal ATA PCMCIA card (Sector size 512 bytes).
% Hostname “xxx-NGN-CE04-C ” is not a legal LAT node name, Using “CISCO_000000″
%Warning: the ratio between logging persistent size and logging persistent filesize is 128000000/16000, suggested ratio is less than 196 in order to achieve good system performace

Press RETURN to get started! // 進入Console CLI模式

• 上一篇：路由器與交換機的區別
• 下一篇：IBM思科壟斷我國核心路由器 H3C如何定位?